NEWS

Choose Trak · Focus on Chinese agriculture

Summer tractor ingenious "summer heat"


Release time:

2021-09-15

The summer temperature is high, the tractor in the use of the process often due to high temperature and a variety of failures, if the machine can pay attention to the following points in the use of the process, it can effectively reduce the occurrence of failures.

The summer temperature is high, the tractor in the use of the process often due to high temperature and a variety of failures, if the machine can pay attention to the following points in the use of the process, it can effectively reduce the occurrence of failures.

1, cooling explosion-proof tire. The summer temperature is high, the tire rubber is easy to age, and the tire burst phenomenon will occur in serious cases. Therefore, the tractor should check the tire pressure at any time when driving, and find that the tire is overheated and the pressure is too high, the car should be parked in the shade to cool down, but it can not be splashed with cold water, otherwise it will lead to a flat tire on the way.

2, cooling and anti-gas resistance. Summer temperature is high, the engine because of high speed, heat dissipation is difficult, easy to travel air resistance, so that the engine sometimes stops for a few minutes is difficult to start. In case of air blockage, the driver should stop the car immediately to cool down and eliminate the fault.

3, observe the water temperature table at any time to prevent water shortage. Driving in high temperature weather, always pay attention to check the cooling water and pay attention to the water temperature meter. When water is found, it is necessary to immediately idle and cool down before adding water, and be careful not to open the radiator cover immediately to prevent burns.

4, oil deterioration. The lubricating oil is easy to be thinned by heat, resulting in poor oxidation resistance, easy deterioration, and even causing failures such as burning tile and holding shaft. Therefore, the crankcase and gearbox should be replaced with summer lubricating oil, often check the quantity of lubricating oil, oil quality, and timely replacement.

5, timely clean the engine surface oil. If the external oil of the engine is too thick, it will affect the heat dissipation, and bury the hidden danger for the failure of various parts. The high pressure injection method can be used to clean the engine parts with a cleaning agent that does not corrode the body parts.